 |
TB 30D
TB 30D is a drawbeam intended for a ball coupling alternatively an automatic coupling with a flat connecting flange. The drawbeam can be installed centrally in the vehicle frame or completely underslung together with endplate kit EDH-2TB.
|
Drawbeam TB 30D
The drawbeam is certified for a D value of 30 kN. The drawbeam is adapted for central installation internally in the frame, or completely underslung together with endplate kit EDH-2TB. The drawbeam can be reversed, whereby the centre of the coupling is moved 12 mm.
When used for towing together with accessory (hole pattern 120x55) the beam can be fitted without reinforcement kit, but with a reduction of its performance (see below). When used with a ball or automatic coupling, however, one of the two alternative reinforcement kits must always be fitted.
| |
With
reinforcement
kit |
Without
reinforcement
kit |
Max tow vehicle weight*
Max centre-axle trailer weight
Max trailer weight |
47.5 tons
8 tons
32 tons |
33.6 tons
6 tons
22 tons |
|
|
* As per Directive 77/389/EEC.
| Performance values |
|
Ball coupling
ex factory Thule (D 22,7 kN)
VBG part no: 07-012700 |
Automatic coupling
D: 41 kN
Dc: 30 kN
S: 350 kg
V: 18 kN |
|
|
Max. dimension of ball coupling:
Length: 130 mm
Height: 100 mm
Max. dimension of coupling:
Length: 90mm
| Specification |
|
Hole pattern:
Performance values:
Support load
Type approval no.: |
120x55 mm, 83x56 mm,
90x0 mm
D 30 kN
367 kg
e11*94/20*5468, is applicable
with fitted reinforcement kits.
|
|
|
| Length mm (A) |
Weight (kg) |
Part no. |
752
770
834
850 |
17,0
17,5
18,9
19,5 |
21-166078
21-165978
21-165878
21-165278 |
|
|
Drawbeams with other lengths, endplate kits with other
heights, or spacers with different thicknesses, can be
quoted on request.
| Description |
Weight (kg) |
Part no. |
Reinforcement kit 120x55, 83x56 mm
Reinforcement kit 90 mm
End plate kit EDH-2TB |
6,0
6,0
30,0 |
21-165600
21-165500
21-112378 |
|
Bolt kit
Drawbeam fitted to vehicle
frame or endplate kit:
- total thickness 14-22 mm
- total thickness 23-30 mm
Fitting of ball coupling to drawbeam
|
|
21-165100
21-165700
21-185200
|
|
Spacer
Thickness 2 mm
Thickness 4 mm
|
|
21-166100
21-166200 |
|
|
